State LawCourtroom FEA: But My Expert Has Hand Calculations

Courtroom FEA: But My Expert Has Hand Calculations

-

- Advertisment -spot_img

Hand calculations are good.

It is very important that design engineers do hand calculations. It is very important that engineering expert witnesses do hand calculations.

For everything but the simplest of part geometries, hand calculations of stress are generally rough estimates. Often they are only in the ballpark of the true maximum stress levels. Sometimes they are only in the ballpark of the average stress levels, and miss the highest stresses entirely.

In the span of 50 years, finite element analysis has gone from esoteric research topic to widely available, widely applied mature technology. In the 1980’s, FEA required extremely expensive mainframe computers, very expensive FEA codes and highly trained analysts, and was still implemented at many large corporations. 

In the 1990’s, Unix workstations provided distributed FEA processing and FEA packages went mainstream, lowering entry costs. A seat of hardware and software still cost many tens of thousands of dollars, and highly trained analysts were still required, and still FEA spread to thousands of companies. 

In the 2000’s, lower priced FEA packages ran well on medium to high-end personal computers, and FEA usage continued to grow. Highly trained analysts are still needed to consistently obtain accurate results, a fact unfortunately ignored by too many in the industry.

Why does FEA usage continue to grow when all of these companies already have hand calculations? Because, when applied correctly, FEA works. It delivers accurate stress estimates for parts with geometry too complicated for hand calculations alone, which describes most of today’s parts. Accuracy means that localized stress concentrations can be removed. 

Accuracy means one less uncertainty, meaning that a lower factor of safety can be considered–resulting in lower weight, lower cost parts that are still stronger and have longer life cycles. Accuracy means that an expert witness can pinpoint areas of concern, and can often nail down the why’s and how’s of a part failure. 

As discussed in previous issues of Courtroom FEA, this will often point the finger at the responsible party, be it designer, manufacturer or end user. Accuracy can mean reduced lab testing by concentrating the investigation on the suspect areas. Accuracy means credibility.

FEA has internal checks that a good analyst needs to apply to verify the results. Hand calculations provide a rough estimate of the results, and the hand calculations and FEA had better match within their accuracies. 

If not, something is wrong with one or both of them, and the analyst had better correct that. Once they do match, hand calculations are an external check of the detailed FEA results. Hand calculations are good.

But they aren’t good enough in a high stakes courtroom battle.

Disclaimer:  The contents of this site, such as text, graphics, images, and other materials contained on the page are for general information purposes only. This article is not a substitute for professional advice on the topics mentioned. This article does not create any form of offers to any legal or professional service. The site assumes no responsibility for errors or omissions in the contents. In no event shall the site be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action to follow the content, negligence or other tort, arising out of the use of the contents of the article. The blog reserves the right to make additions, deletions, or modifications to the contents at any time without prior notice. The site does not warrant that the site is free of viruses or other harmful components. It may contain views and opinions which are those of the authors and do not necessarily reflect the official policy or position of any other author, agency, organization, employer or company, including the site itself. It also does not provide professional advice, diagnosis, treatment or any legal service. The site does not endorse official procedures, legal actions or qualified services and the use of its contents are solely at your own risk.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest news

Divorce & Health Insurance

Recently, I had a question from someone who was going through a divorce and was concerned about lost health...

Divorce & Health Insurance

Recently, I had a question from someone who was going through a divorce and was concerned about lost health...

Dissolution by Affidavit – Personal Appearance Not Required

The elimination of the requirement of personal appearance for hearing in Missouri dissolution of marriage actions arose out of,...

Discover The Nine Vital Questions You Need To Ask Before Hiring Your Personal Injury Lawyer

Once you know the right questions to ask, hiring your personal injury lawyer is not only easy, but you...
- Advertisement -spot_imgspot_img

Disciplining And Firing Employees

Perception is Reality – Discipline with Care! Disciplining and firing employees is one of the most crucial areas for consideration...

Dental And Medical Collection Legal Guidelines

Every medical and dental practice has to deal with patients who do not pay. If it doesn't deal with...

Must read

Deeds of Variation – Are They Justified?

Deciding to make a Will and then actually putting...

Courtroom FEA: But how does FEA work?

Many legal professionals are exposed to Finite Element Analysis...
- Advertisement -spot_imgspot_img

You might also likeRELATED
Recommended to you